Circuit Protectors
NC1V Circuit Protectors
Compact, Lightweight & High performance
IDEC’s original spring-up, fingersafe terminals enhance reliability and safety.
Features & Benefits
- Rocker type snaps into a panel.
- Rated voltage: 250V AC and 65V DC
- 35mm-wide DIN rail mounting (NH1V)
- Available with dual-coil.
- Available with auxiliary contact or alarm contacts.
- Available with inertia delay.
- Hydraulic-magnetic tripping system.
- Safe trip-free mechanism.
- Available in tab terminal and screw-terminal. This product is recognized by Underwriters Laboratories under UL1077 as a “Supplementary Protector.
NH1 Circuit Protectors
Hydraulic-magnetic tripping system
Wide range of applications from office automation and consumer use to factory automation.
Features & Benefits
- Available with inertia delay.
- Available with auxiliary contact or alarm contact.
- Safe trip-free mechanism.
- Vibration-proof design.
- Variety of mounting methods.
- IEC (IEC 60934) compliant.
- Available in tab-terminal and screw-terminal suited for crimping-terminal wiring.
NRA Circuit Protectors
Vibration Proof Design
Best selling circuit protectors. Wide selection of applications ranging from computers to office and factory automation.
Features & Benefits
- Available with inertia delay.
- Available with auxiliary contact or alarm contact.
- Hydraulic-magnetic tripping system.
- Safe trip-free mechanism.
- Vibration-proof design.
- Variety of mounting methods.
- IEC (IEC 60934) compliant.
NRBM Circuit Protectors
Compact Size
Variety of rated currents: 1A to 50A. Widely employed for protection of PC power circuits and large current circuits of welding machines.
Features & Benefits
- Electromagnetic trip, not affected by ambient temperature.
- Safe trip-free mechanism.
- Available with auxiliary contact and alarm contact.
- Available with inertia delay.
Type
Name
Downloads
NC1V Circuit Protectors Brochure
NH1 Circuit Protectors Brochure
NRA Circuit Protectors Brochure
NRBM Circuit Protectors Brochure
NRF Circuit Protectors
IP20 degree of protection
Snaps into a 16-mm-diameter hole. Wide variety of applications such as office automation equipment.
Features & Benefits
- 16mm-dia fuse holder size.
- More than 1,000 repeat operations.
- Snap-on mounting.
- Visible trip indicator.
- Variety of rated currents.
NRL Circuit Protectors
Compact size (only 36.6H × 16.8W × 42Dmm)
Miniature circuit protectors with hydraulic-magnetic tripping system, allow for space and cost savings. Long life also reduces maintenance costs.
Features & Benefits
- One-lever (one-rocker) for 2-poles, ensures proper interruption to both poles when one pole is tripped.
- Low, middle, and high speed response.
- Variety of rated currents and internal circuits.
- Available with auxiliary contacts and inertia delay.
- Over 20,000 mechanical operations.
- Hydraulic-magnetic tripping system.
- Safe trip-free mechanism.
- Vibration-proof design.
NRP Circuit Protectors
Higher economic efficiency than a fuse
Mountable directly on PC boards with non-sealed and sealed types
Features & Benefits
- SIL subminiature circuit protectors adopting IC terminal arrangements, and mountable directly on PC boards.
- Simple construction and high performance applying a positive load reversing mechanism by IDEC’s original design.
- Unlike fuses, the thermal trip mode (bimetal) eliminates erroneous interruption due to inrush currents.
- Rated current can be selected to meet the load. Circuits with high inrush currents can be protected against overloads (unlike fuses).
- Reusable 200 operations (tripping at 200% the rated current) with higher economic efficiency, and less maintenance than fuses.
- Available in slim and flat styles. Slims (can be mounted on PC boards by using pick and place machines).
- Available in non-sealed and sealed types. With the sealed type, cleaning after soldering is possible.
- With a manual OFF mechanism, convenient for circuit checkups.
Type
Name
Downloads
NRF Circuit Protectors Brochure